mikleins29
Well-known member
- Joined
- Dec 10, 2011
- Messages
- 131
- Reaction score
- 0
- Location
- omaha
- My Car
- 71 fastback 351cleveland 4 speed
According to the wire diagram the red wire and blue stripe connects to s terminal and red with green stripe is I terminal however with a new ignition switch adjusted properly and starter solenoid turn key and no crank over. Swithch the two wires and turn key just out of locked position to run and it cranks over before turning key to start position. The adjustment of the ignition switch was pull key back in acc position and push switch as far away as it could go then tighten nuts. Put a test light to pos cable and red and green wire with out it connected to the solenoid and it lit upin the of pos then turned key to run pos and test light turned off what coucould be the problem.