- Joined
- Aug 14, 2014
- Messages
- 4,313
- Reaction score
- 1,360
- Location
- Madison, WI
- My Car
- 1971 Mach 1 w/408C stroker
Curious if anyone is using Wilwood's master cylinders for power brakes. I am looking at the p/n 260-8555 with 1" bore for power brakes, disc/disc setup. I have a Wilwood 2-piston front caliper and an ElDorado 1-piston rear setup. It says that these have a 2:1 front bias so I am curious how do they perform. I have a rear line proportioning valve that I will use to fine tune.
https://www.wilwood.com/mastercylinders/mastercylinderprod?itemno=260-8555
I currently have a Scott Drake 1" bore master that is leaking after two years that I want to replace.
https://www.wilwood.com/mastercylinders/mastercylinderprod?itemno=260-8555
I currently have a Scott Drake 1" bore master that is leaking after two years that I want to replace.