- Joined
- May 19, 2021
- Messages
- 1,374
- Reaction score
- 970
- Location
- Fort Mohave, AZ & So Cal (Upland)
- My Car
- 73 Grande will undergo three phase build process. Phase 1 is complete (driver). Phase 2 is interior/exterior restoration. Phase 3 is ++ performance.
Hello:
I'm getting close to reassembling the front suspension on my 73 and was wondering if someone had a guide to do so? I’ve got tje shop manual, and a Clinton one too, but I was wondering if someone had a sequence plan with the torque, what to watch out for, etc thing. I’ve done front ends, just not the coil on A Arm type and wanted it to all come out fine. My plan is, each side suspension, install engine and trans, then steering and swap bar stuff; don’t want to scratch anything. Thanks.
I'm getting close to reassembling the front suspension on my 73 and was wondering if someone had a guide to do so? I’ve got tje shop manual, and a Clinton one too, but I was wondering if someone had a sequence plan with the torque, what to watch out for, etc thing. I’ve done front ends, just not the coil on A Arm type and wanted it to all come out fine. My plan is, each side suspension, install engine and trans, then steering and swap bar stuff; don’t want to scratch anything. Thanks.