Search results

Hi, I noticed a leak on the shifter cable. I read in a few places that you can change the o ring without dropping the pan and the valve body. They say take the nut off but there is no nut. I think it must be the o-ring because its leaking out of the inside not from the trans body. If I...

Hi, I am in the process of routing lines from my radiator to the transmission. Does anyone have pictures showing the correct route starting at the radiator and including where the lines fasten to along the run back to the transmission? The car is a 72 with a 73 C6 transmission. I included...

Hi, Is there any dimensions for where the e-brake enters the drivers pan?  Maybe I'm over thinking this but I do not want to drill a hole in the wrong spot. Thanks, Darren

Hi, I am setting pinion with crush sleeve.  I'm getting so many conflicts on spec.  I'm  reading 15" up to 25".  Also seeing it with oil seal in or out while preloading.  One guy preloads crush sleeve then takes the nut off, installs seal, and then torques to spec like somewhere in 175 lb...

Hi, Can someone please give me some quick info on this bracket? There are two on each side underneath trunk floor. I didn't measure in before I pulled the trunk floor out.  I guess I can measure off the underside of where the hatch holder locks in when its dropped down into the trunk of the old...

Hi, Wondering if anyone has dimensions for the E Brake Link Bracket on the passenger side located by the cross rail and inside frame rail.  I attached my measurements and wanted confirmation before I weld.  It was removed many years ago so I want to check what I have for measurements. I think...

Hey Guys, I have a few questions.  I'm rebuilding the 9" rearend on my 72 Mach. First question who has experience with 3:50's or 55 gears.  Going back and forth from the 3:25's or the 50's or 55's?  I noticed with the calculator that you can find on line isn't a heck of a lot of difference in...

Hi Everyone, Hope this message finds everyone well.  I'm finding ironically... I suddenly have more time for my car.  Even under this difficult situation we are facing I'm taking some of the down time to spend with family and work on the 72. Anyways I took the parts shown in the pic off the...

Hey Guys, Quick question...what size bolt for fuel tank straps?  I think its 3/8 carriage bolts? Thanks

Hi Guys, Wondering if someone can shed some light on this.  Dry fitting new tail piece and trunk cross rail .  Noticed flanges from frame which are suppose to weld to trunk rail are off.  Right side is off 1/2".  Other side 1/4".  I know the car has been hit and repaired on the right back side...

Looking for some feedback on some headers.  Any suggestion on what I should put in my 72 mach 1.  It has a 73 block.  Looking at different options. Thanks

Hi, I am trying to rebuild the ass end of a 72.  I bought this trunk corner Dynacorn to see what the fit will look like before buying everything else.  If someone installed one I need some advice or look at the pic and enlighten me.  Why does the backside of the piece stick out beyond the tail...

Hi, Any advice on if its worth paying the extra $ to buy a Dynacorn tail piece section vs the cheaper one.  I've read people weren't happy with the Dynacorn one and thought it was a waste of money.  I'm also replacing the lower corner brackets in the trunk section.  Are there any pics on here...

Hi Guys, We are rebuilding 72 -73? heads 4V on a 351C.  I have a High Energy Cam from Comp with 940-16 Valve springs.  The seals that came out were Speed Pro ST2012 33.  Any advice on what should be put back in.   Thanks, Darren

Does anyone have any experience with welding on trunk extensions or drop offs?  The passenger side is rotted and looking at it, it may be difficult getting the top of the original metal out.  Any access tricks like taking off bumper?  The pics I see typically shows it with quarters off.  I want...

Hey Guys, Can anyone help me with a pic or info where the emergency cable comes through the drivers floor on a 72. It's all rotted and the new pan has no sign of where it should enter. Thanks, D. Rolls

Hi Guys, Can some of you share what you painted your Mustang's rear end with? Epoxy? I have a 72 Mach1.

Hi Guys, Just wondering what you would do with the 9" rear end that was pulled out of my Mustang. I am going to paint it and such but should I look inside and changeout any seals or gaskets. I was thinking of replacing the wheel bearings at a minimum. Thanks, D. Rolls

Just wondering if anyone rewired their car with a universal main wiring harness. I'm toying with the idea of replacing all the wiring in the car. Its a rats nest. Not any time soon but was wondering how these kits adapt to all the stock connectors. Is it a hassle or is it relatively...

Hey, Does anyone have a diagram showing how the front break and rear line mounts to the firewall? I'm not sure where the clips mount. Some are obvious but I'm not sure if there is one under the power booster.