- Joined
- Mar 5, 2013
- Messages
- 313
- Reaction score
- 5
- Location
- Carlisle, PA
- My Car
- -Former 70 & 72 Mustang coupes owner.
-69 Torino GT, Formal Roof, 351W, Edelbrock 600 cfm, dual plane high rise intake, long tube headers, AOD trans, dual flowmasters, Pertronix II Billet, 3.5 TRACLOC g/r, 15" Magnum 500s, 100A alt, mini-starter
-70 Mach 1, 351W, FMX
Gurus,
My 72's 289 Power Steering Pump is cracked and it needs to be replaced. I have my old PS pump from my 250 engine and I'm thinking it should work fine. Problem being I don't have the 2 brackets and spacers required to mount it. I believe a standard 302 setup will work fine on the 66 289 especially since I didn't change any of the hoses. Please advise if I'm wrong.
Since there are several folks on here that have upgraded to various monstrous engines and have spare parts like myself, does anyone have the mounting bracket and cradle bracket available? I'll pay shipping plus a reasonable cost or pay it forward as I've done a few times. My zip code is 22554.
Attached are pics of my 72's original I6 PS pump and the current 289 PS pump.
KR
My 72's 289 Power Steering Pump is cracked and it needs to be replaced. I have my old PS pump from my 250 engine and I'm thinking it should work fine. Problem being I don't have the 2 brackets and spacers required to mount it. I believe a standard 302 setup will work fine on the 66 289 especially since I didn't change any of the hoses. Please advise if I'm wrong.
Since there are several folks on here that have upgraded to various monstrous engines and have spare parts like myself, does anyone have the mounting bracket and cradle bracket available? I'll pay shipping plus a reasonable cost or pay it forward as I've done a few times. My zip code is 22554.
Attached are pics of my 72's original I6 PS pump and the current 289 PS pump.
KR
Last edited by a moderator: