Android Auto/Apple Carplay in 1973 Mustang Mach1

[DOHCMagna]

Not sure if this has been done before - couldn't find anything anyway so was a bit of a project to make come to life.
Aftermarket centre stack, and I 3D printed an adaptor to retrofit a 7" touchscreen - or regular double DIN headunit out of ABS. about 10 prototypes were done to get the perfect fit.
Only modification needed was bending up the metal cage behind it to give the gauge cables some breathing room.
Didn't come out too bad.
If you're after one, let me know. Australia based.
Also installed 3 x RaceWorks gauges. New sensors, nifty little things.

 

[73pony]

Nice work!

 

[Steve McMahan]

Very nice. Can you post more pics of the process of making and integrating the parts? I’m not too sure how the pieces fit together. I thought about going this way, but a single DIN worked for me and had the backup camera. That looks great, almost factory.

 

[DOHCMagna]

Very nice. Can you post more pics of the process of making and integrating the parts? I’m not too sure how the pieces fit together. I thought about going this way, but a single DIN worked for me and had the backup camera. That looks great, almost factory.

Thanks. Although I have access to a 3D scanner, it's pretty basic to sort out with some calipers. Started with a cardboard template of the side profile I needed to make, and slowly started adding features. It's bolted in from behind with 4 heatsert nuts, and 2 more heatsert nuts to bold the adaptor up from underneath as shown below.

Really a tight fit to get everything snug and looking somewhat OEM.
Although I've seen the other widescreen 7" units it's just nice to have a generic 7" double DIN size available. Who knows in a few years if this carks it, you could honestly fit whatever else you wanted.

But Dad wanted Google Maps, so it'll be sweet whilst driving.

Any points where a screw goes in or any flimsy points are 100% infilled to make it as strong as possible. Feels good!

 

[rcadd1ct]

Nice job. Here is my work in progress.

I need to finish the climate control mounting. I got distracted by speaker instal and power window install.

Had the speaker install into doors ready then the nu-relics power window regulator came in and they interfered with speaker holes I made.

Making a repair panel to support where I cut speaker hole

Then I have to make new speaker holes.

Jeez

 

[DOHCMagna]

Nice job. Here is my work in progress.

I need to finish the climate control mounting. I got distracted by speaker instal and power window install.

Had the speaker install into doors ready then the nu-relics power window regulator came in and they interfered with speaker holes I made.

Making a repair panel to support where I cut speaker hole

Then I have to make new speaker holes.

Jeez

I guess thats why I went the 7”. With the adapter it still leaves the climate controls accessible. Still looks great though!

 

[rcadd1ct]

I guess thats why I went the 7”. With the adapter it still leaves the climate controls accessible. Still looks great though!

Thx.

I still need to move the radio back another .5-.75” so the screen can tilt back.

It is tilted forward now to clear the shifter.

Me and my OCD….

Component speakers front and back.

Pair of 12” shallow stereo subs and an amp will round out the system.

Won’t be super loud, but trying to balance sound vs weight

This is my high school car. Class of 86. I had four 12” subs in the rear deck. This was the package tray.