SLOWnSTEADY
Active member
- Joined
- Dec 11, 2010
- Messages
- 34
- Reaction score
- 0
- Location
- Cedar Rapids, IA
- My Car
- 1973 Mach One
2000 Chevrolet Impala
1987 Mazda RX7 (Turbo SBF swapped)
1987 Toyota 4Runner (7MGTE swapped)
few other projects...
Hey guys, new here, obviously. first, I want to thank droptop73 for referring me to this site!!
The name is Keith, I am 24, from Cedar Rapids, IA and the reason for joining this site is because I have a 1973 Mach One. I have been in love with the '69's and 73's since I can remember. Being that the '73 is cheaper, I decided to start with it since I have a few other projects going and am in school and have a son and soon to be wife.
I picked the car up from someone in IL who got it from someone in MA. I have had it a year and haven't really done a lot to it yet because I have been working on other projects but I finally started collecting parts and have the build all planned out for the most part. The car came with a complete, brand new black interior and a few boxes of NOS parts which I will probably sell because I am resto-modding and don't want to "waste" the brand new NOS parts.
I will reply with some more details as I tend to get long winded when I start talking about my baby and don't want to overwhelm anyone with my very first post! LOL So, if you are interested in hearing more, read on...
Last winter I built a pretty solid 4.6L DOHC modular motor setup with an 80mm turbo. The engine ended up making WAY too much power for anything other than an all-out race car so I sold it. I now have a mild 460 big block, I would guess in the 500-550 horsepower range. Along with it is a simple C6 with a TCI 3K stall converter. That is what will be going into it in the next couple months at some point.
I am still planning a modular motor swap but I am going 4.6L DOHC with the Cobra M112 setup instead of turbo. The car needs floor pans and a trunk pan, both are decent and could easily get away with patch panels but I figure "Do it once, do it right". It will be getting an 8.8" rearend from an FX4 ranger (locker, 31-spline axles, 3.25" tubes, disc brakes) and either a 4-link or ladder bar setup. the FX4 axle is about 3" narrower than the stock rearend which I am going to combine with a mini-tub and so I can run the modern 10.5"/325 rear wheel setup.
Interior is going to be pretty much stock other than the gauges. Exterior I am going to keep as smooth as possible, no emblems, no decals, no stripes etc. The color is going to be semi-gloss black, rims are going to be black with a polished lip.
here are some pictures, as you can see, it has a HORRIBLE paint job due to the person from MA (according to the guy I got it from in IL). A lot of the stuff that was done to the car was completely "rigged". lots of wood screws, zip ties, adhesive, cobbled wiring etc. Luckily, it came with a brand new wiring harness! Other than the dash but I am using aftermarket gauges and ignition and won't have heat or A/C, not sure what else the harness controls...
The name is Keith, I am 24, from Cedar Rapids, IA and the reason for joining this site is because I have a 1973 Mach One. I have been in love with the '69's and 73's since I can remember. Being that the '73 is cheaper, I decided to start with it since I have a few other projects going and am in school and have a son and soon to be wife.
I picked the car up from someone in IL who got it from someone in MA. I have had it a year and haven't really done a lot to it yet because I have been working on other projects but I finally started collecting parts and have the build all planned out for the most part. The car came with a complete, brand new black interior and a few boxes of NOS parts which I will probably sell because I am resto-modding and don't want to "waste" the brand new NOS parts.
I will reply with some more details as I tend to get long winded when I start talking about my baby and don't want to overwhelm anyone with my very first post! LOL So, if you are interested in hearing more, read on...
Last winter I built a pretty solid 4.6L DOHC modular motor setup with an 80mm turbo. The engine ended up making WAY too much power for anything other than an all-out race car so I sold it. I now have a mild 460 big block, I would guess in the 500-550 horsepower range. Along with it is a simple C6 with a TCI 3K stall converter. That is what will be going into it in the next couple months at some point.
I am still planning a modular motor swap but I am going 4.6L DOHC with the Cobra M112 setup instead of turbo. The car needs floor pans and a trunk pan, both are decent and could easily get away with patch panels but I figure "Do it once, do it right". It will be getting an 8.8" rearend from an FX4 ranger (locker, 31-spline axles, 3.25" tubes, disc brakes) and either a 4-link or ladder bar setup. the FX4 axle is about 3" narrower than the stock rearend which I am going to combine with a mini-tub and so I can run the modern 10.5"/325 rear wheel setup.
Interior is going to be pretty much stock other than the gauges. Exterior I am going to keep as smooth as possible, no emblems, no decals, no stripes etc. The color is going to be semi-gloss black, rims are going to be black with a polished lip.
here are some pictures, as you can see, it has a HORRIBLE paint job due to the person from MA (according to the guy I got it from in IL). A lot of the stuff that was done to the car was completely "rigged". lots of wood screws, zip ties, adhesive, cobbled wiring etc. Luckily, it came with a brand new wiring harness! Other than the dash but I am using aftermarket gauges and ignition and won't have heat or A/C, not sure what else the harness controls...
![machonedrivers.jpg](https://proxy.imagearchive.com/da7/da7b27b25cf99239289f590c0c353f74.jpg)
![machonepass.jpg](https://proxy.imagearchive.com/df1/df105a98858b4817091fe16dcd1d8aae.jpg)
![machonefront.jpg](https://proxy.imagearchive.com/056/056fd01157e351f102b68e2b09c8b15c.jpg)
Last edited by a moderator: