help with parts needed

[machattack]

Hi,
Is there any vendor who sells the bolt studs and nuts to hold the nostrils/hood scoops to the hood? I would like a new set if offered. Pic attached of studs and nuts.

 

[rio1856]

The studs and nuts are supplied by AMK. Check with Don at OMS he'll probably have them.

 

[Hemikiller]

Here's the AMK kit at NPD

https://www.npdlink.com/search/products?search_terms=16C630-4AK&top_parent=200001&year=1973

 

[machattack]

The studs and nuts are supplied by AMK. Check with Don at OMS he'll probably have them.

Thanks RIO !!!

 

[machattack]

Here's the AMK kit at NPD

https://www.npdlink.com/search/products?search_terms=16C630-4AK&top_parent=200001&year=1973

Thanks Hemi killer!!!

 

[Bill Perkins]

I made my own with screws from Ace Hardware, just cut off the screw head and gently file the burr's off the stud

 

[machattack]

I made my own with screws from Ace Hardware, just cut off the screw head and gently file the burr's off the stud

Thanks Bill for your Hint! appreciated. I plan at car shows to lift my hood to show the engine compartment. I need the special nuts to match the studs. I think they were nickle coated? Anyways, when the hood is up the studs and nuts are right in your face.......Ha, no pun intended.

 

[Sheriff41]

The AMK hardware is nice but they don't have the unthreaded front on the stud like the originals. Not a problem if you replace all the pieces.

 

[Bill Perkins]

I have the nickel plated nuts on my scoops studs, I can send you a picture if you like