AmericanPowertrain
Member
- Joined
- Jan 18, 2011
- Messages
- 21
- Reaction score
- 0
- Location
- Middle TN
- My Car
- 67 357Magnum Cougar
66 Mustang FB
Hello Gents,
I found this site looking at a post about our hydraulic clutch systems and thought I would stay for the ride. We have a ton of experience with manual transmissions, clutches, flywheels and all things manual transmission (especially TREMEC stuff) and would be happy to help anyone here with transmission related tech questions, fitment issues and the like.
The company has a couple of ponies in the stable, our 1967 357Magnum Cougar with a built 351C and a TREMEC Magnum 6-Speed and a 1966 289 Fastback that we are starting on in the spring.
Per my hydraulic post, if anyone has a 71-73 in the neighborhood (middle Tennessee between Knoxville and Nashville) and would like to add a hydraulic clutch swap to their car, we are interested in doing the install and taking some important notes to help the 71-73 community.
In the mean time, pick our brains anytime. There is not much there, but what there is will be full-up with knowledge on gearboxes. We look forward to helping out.
I found this site looking at a post about our hydraulic clutch systems and thought I would stay for the ride. We have a ton of experience with manual transmissions, clutches, flywheels and all things manual transmission (especially TREMEC stuff) and would be happy to help anyone here with transmission related tech questions, fitment issues and the like.
The company has a couple of ponies in the stable, our 1967 357Magnum Cougar with a built 351C and a TREMEC Magnum 6-Speed and a 1966 289 Fastback that we are starting on in the spring.
Per my hydraulic post, if anyone has a 71-73 in the neighborhood (middle Tennessee between Knoxville and Nashville) and would like to add a hydraulic clutch swap to their car, we are interested in doing the install and taking some important notes to help the 71-73 community.
In the mean time, pick our brains anytime. There is not much there, but what there is will be full-up with knowledge on gearboxes. We look forward to helping out.