Parts Wanted Speaker wire pigtails

[Rozz]

Looking for door speaker wires that goes from the door speakers to the under dash wiring harness Or at least the pigtails.

 

[Motorcity Mustang]

I should have a pair of those with the rubber boots. Let me get you a picture.

 

[Rozz]

A picture would be awesome, thanks.

 

[Motorcity Mustang]

Here is the picture of the wiring through the door/jamb.

 

[machattack]

Is there a factory pigtail plug under the dash for speakers on all mustangs? mach ones?

 

[MikeGriese]

There is a harness that runs from the stereo radio to the doors. The harness was not installed on cars that did not have the stereo. This is a difficult harness to find intact, as most cars had different radios and speakers installed over the years and the harnesses get hacked up.

 

[Rozz]

I have everything as pictured and like Mike said some one cut off my red male and female pigtails, all I really need are the pigtails orange/black wires for one side and the white/black wires for the other side. I would hate to cut them off a good harness but, if you have just the pigtails that would be great.

 

[midlife]

If you're not concerned about wire colors being correct, Ford used standard trailer bullet plugs. You can get generic male/female plugs at:
https://www.delcity.net/store/Molded-Connectors/p_917717

 

[Rozz]

I would prefer to have the correct colored wires, if possible. I would think there is a old harness some where. ford used the same colored wires and bullet plugs for several years and on several models. But, at lease I know there is an opinion, thanks. Any help is much Appreciated

 

[Motorcity Mustang]

I have the correct wiring for under the dash also, but not interested in cutting the plugs off those wires.

 

[knn]

If you're not concerned about wire colors being correct, Ford used standard trailer bullet plugs. You can get generic male/female plugs at:
https://www.delcity.net/store/Molded-Connectors/p_917717

FWIW, this was how we did ours. We just bought trailer connectors and fabricated our own harness. Not as pretty as OEM, we have tunes now.

 

[Rozz]

That was my point also, I didn’t want anyone to mess up a good harness. I would think someone has a bad harness already and could part out the pigtails.