What did you do today instead of working on your Mustang?

[Hemikiller]

Took the Mach to the local Cars n Coffee Sunday morning. Humid AF, but ended up with a good turnout.




This was my favorite of the day, haven't seen a 5.0 swapped XR4Ti in ages.

 

[Ron Tanzi]

I did nothing that was pleasant.

Ron

 

[basstrix]

Finished up the angle pointers that were mostly finished on Saturday...they install to the turnplates used for setting front alignment. These were cheaper plates off of craigslist that didn't have the floating angle pointers.

After that, I cut open the Duraspark-I wiring harness to splice in a rev limiter. Had originally used the Painless harness and swapped the green/orange wires and added a shrink-wrap jacket to give it a factory look. Had to cut part of that off, splice, and then put a jacket back on. Added a 5-pin connector between the harness and rev limiter too.

 

[LOUHABY]

No work, but had a good ride,,,,,,only thing,,,everybody honks when aside on highway at 70 mph,,,,,so far, all good thumps up!!!!!,,,,,,Lou

 

[73pony]

Primed, painted the block and started mocking up. 408 stroker.

 

[Sheriff41]

Primed, painted the block and started mocking up. 408 stroker.

Looks good! Is that a metallic blue?

 

[73pony]

Looks good! Is that a metallic blue?

Yes. Had it custom mixed.

 

[Cleveland Crush]

Looks like a real nice setup. Love that engine block color!
You must have a good supply of silhouette targets using them as paint shields!!

 

[basstrix]

Looks like a real nice setup. Love that engine block color!
You must have a good supply of silhouette targets using them as paint shields!!

Haha, I noticed the target, as well.

 

[73pony]

Well I do buy them in bulk and that’s what I had.

 

[James561]

Here's the $66k 1973 Vert 302 Auto with all sorts of incorrect parts all over it. That gap at the hood is terrible also. Had to be 2 drunk guys going after it.
https://www.barrett-jackson.com/Events/Event/Details/1973-FORD-MUSTANG-CONVERTIBLE-269175

Looks like the same gap on my hood. It is not an OEM hood, but a after-market repro.

 

[TempStang]

I've been working on the Stang when time allows, try to do at least something every day even if it's just thinking about what to do next.
But last week it was all fishing! Went to the Detroit river for muskies and walleyes. My wife flew over from Chicago and fished for a couple of days before flying back. Unfortunately she did not land a muskie this time but was hot with the walleyes. The muskie action picked up and 18 muskies were landed by weeks end. Now back to my other favorite hobby.

 

[PoFoMoCo]

You’re gonna need a bigger boat

 

[Sheriff41]

I've been working on the Stang when time allows, try to do at least something every day even if it's just thinking about what to do next.
But last week it was all fishing! Went to the Detroit river for muskies and walleyes. My wife flew over from Chicago and fished for a couple of days before flying back. Unfortunately she did not land a muskie this time but was hot with the walleyes. The muskie action picked up and 18 muskies were landed by weeks end. Now back to my other favorite hobby.

That's one heck of a a fishin' pier!

 

[Cleveland Crush]

I've been working on the Stang when time allows, try to do at least something every day even if it's just thinking about what to do next.
But last week it was all fishing! Went to the Detroit river for muskies and walleyes. My wife flew over from Chicago and fished for a couple of days before flying back. Unfortunately she did not land a muskie this time but was hot with the walleyes. The muskie action picked up and 18 muskies were landed by weeks end. Now back to my other favorite hobby.

Coax some of those Muskies about 250 miles down the shore to this part of Lake Erie

 

[Mach I Pony]

Today is day one of the fourteen year I spent with the joy of life my Must- have wife.
FYI , I've owned my 73 Mustang MACH I for 21 years. I bought it with a credit card a year and a day after 911, September 9, 2011. I'm currently replacing all the interior lights with LEDs

 

[TempStang]

That's one heck of a a fishin' pier!

The Gordie Howe International Bridge is expected to be completed in 2025.
The pictures below were taken exact 1 year ago. Truly amazing work.

 

[Hemikiller]

For you guys that follow Street Outlaws, Farm Truck and Azn stopped by the shop yesterday. We're hosting a bunch of the other racers tomorrow morning for breakfast and a shop tour.

 

[Kilgon]

I got the craven for some serious speed so my wife and I went to Kings Island yesterday. I road Orion, Banshee and Diamondback. I had a grin ear to ear and laughed like a kid. What a great day.

 

[basstrix]

It's 10:50AM and already 106...supposed to hit 114 today. Don't know how long I'll be in the garage today.