Jump to content

Door speaker placement


Recommended Posts

Allow me to preface this posting with an apology if it has been covered. I was unable to find an answer to my speaker issue.

I have an unusual situation. The P.O. of the car has welded up the speaker holes in the doors. (photo #1)

I have a set of Polk Audio, 5 x 7 x 2.75" speakers to install in the doors.

I started by removing the knock out panel at speaker location in the door panel. (photo #1)

I then centered the speaker on the door panel opening. It appears to me that with the speaker centered on the opening, the speaker is too low, and the speaker grill would not attach properly. (photo #2)

I recall seeing a photo showing a speaker in a door, without the grill installed, and the speaker was not centered in the opening. Is this correct?

I would like to install the speakers so that the front face of the speaker rest against the inside of the door, for an almost flush fit.

Could someone provide me with a dimension, possibly from the bottom of the door, to the bottom of the speaker, so that I could layout the door for cutting, and allowing me clearance for the speaker grill?

I have not handled a set of the rectangular speaker grills and I do not know the outside dimensions of the speaker grills. or the method of mounting the grills.

 

Thanks in advance



 

IMG_1461.JPG

IMG_1463.JPG

IMG_1464.JPG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...