Higgins56
Well-known member
- Joined
- Jan 2, 2012
- Messages
- 193
- Reaction score
- 0
- Location
- Finland
- My Car
- 1971 Mach 1 Fastback now with 503 CID 4 bolt block with AFR Bullit heads , Edelbrock Performer RPM AirGap intake and ProSystems carburettor 1050.
4 sp Toploader with 9" Wavetrac rear.
Caltracs and shocks at the rear.
HI,
My 429 Mach1 restoration was started by the previous owner 8 years ago and at some stage he restored the front suspension. I have not gone it through but I know that the every component was out of the car and it looks pretty good...
It works well BUT annoyingly it squeaks in road bumbs or if you try to push the front end down by hand - it makes the sound.
How to get rid of this unpleasant sound ?
I do not know if the bushings are original rubber or polyurethane....
My 429 Mach1 restoration was started by the previous owner 8 years ago and at some stage he restored the front suspension. I have not gone it through but I know that the every component was out of the car and it looks pretty good...
It works well BUT annoyingly it squeaks in road bumbs or if you try to push the front end down by hand - it makes the sound.
How to get rid of this unpleasant sound ?
I do not know if the bushings are original rubber or polyurethane....