All About Build Sheets

[Steve73QMach1]

thanks for the alternator info so far. I started a separate thread for this topic of collecting alternator info at the following location:

http://www.7173mustangs.com/thread-1973-mustang-alternator-applications

Please post all future build sheet/alternator code data there. Thanks!

 

[sm3570]

I found another build sheet, It is a 71 H code Grande, the BS says it is a 5A alternator code. Just like the 73 H code bs I have. I checked the assembly manuals, they show 7 different alternators were possible.

Judge, would you mind e-mailing the buildsheets to me? I can PM you my e-mail.

 

[judge]

Yes. PM your address. Probably will be next week.

 

[bkdunha]

Does anyone have a Build Sheet on a factory ram air car? Interested to know notation on Row B box 40.

 

[Don65Stang]

Does anyone have a Build Sheet on a factory ram air car? Interested to know notation on Row B box 40.

Mine shows code "F".

 

[Don65Stang]

Here are a few more build sheets for Steve's spreadsheet...

 

[bkdunha]

Just what I needed to confirm. I had a ram air build sheet on another computer that crashed and noted F for functional ram air and N for non-functional in my written notes. Someone in a different forum was questioning that and I did not want to respond without confirming my notes. Thank you

 

[judge]

For those trying to remove or clean up their build sheets. Use wax and grease remover. Pep boys or any auto paint supplier will have it. Keep it wet if in the car. It will float loose. When out of the car I lay it flat in a 1" deep baking pan, I put about a 1/4" of the wax and grease remover in the pan. The asphalt base will float off in a few days work without hurting the paper or print.

 

[jb73Mach]

I'm trying to build a spreadsheet to transfer my build sheet information but part of mine is missing. Can someone provide the headings for the following positions: F30, F33, F34, F35. Looking for the column names from the build sheet blank dated Aug. 1972. The sheets do appear different for different years. Lots of pictures are posted but they are not clear when zooming in on the small letters printed on the form.

Thanks

 

[jeff8877]

Jeff,

I have a build sheet I found in a junkyard car that was built in late 72 (73 model). I can't read the date of the build sheet blank.

F30 Front End/Steering Wheel Column/Color...COL in field

F33 Front End/Steering Wheel Column...1st Gear Lockout in field

F34 Front End/Steering Wheel Column...Trans in field

F35 Front End/Steering Wheel Column...Type Shift in field

Jeff

I'm trying to build a spreadsheet to transfer my build sheet information but part of mine is missing. Can someone provide the headings for the following positions: F30, F33, F34, F35. Looking for the column names from the build sheet blank dated Aug. 1972. The sheets do appear different for different years. Lots of pictures are posted but they are not clear when zooming in on the small letters printed on the form.

Thanks

 

[jb73Mach]

I did put together a spreadsheet for the 73s. Feel free to use it to store or forward info using it.

73 Build Sheet Template.xlsx

 

[Steve73QMach1]

I did put together a spreadsheet for the 73s. Feel free to use it to store or forward info using it.

Good work John! I can use this. I'm afraid my sheets are non-existent - but I will look for them.

 

[jb73Mach]

I did put together a spreadsheet for the 73s. Feel free to use it to store or forward info using it.

Good work John! I can use this. I'm afraid my sheets are non-existent - but I will look for them.

There are a couple of glitches in formatting. I'll repost when I get it fixed.

 

[MeZapU]

This is all I found when I pulled the rear seat and carpet out of my car. Not a lot, but at least its something.

 

[jb73Mach]

I did put together a spreadsheet for the 73s. Feel free to use it to store or forward info using it.

Good work John! I can use this. I'm afraid my sheets are non-existent - but I will look for them.

There are a couple of glitches in formatting. I'll repost when I get it fixed.

Reposted on the original location. The formatting is fixed so you can actually enter data.

 

[72Bossclone]

Anybody have what the various codes were for the different wheels, I have a 72 sports roof and it had cragars on it when I bought it and am interested to know what the original wheels or hubcaps were. My build sheets codes are as follows

Fender skirts - D

Wheel covers - S

Code - blank

- D

- V

Tires are

Code - F

Size E70 X 14

Color - W assuming means whitewalls

I'll try and post my whole build sheet tomorrow. Any helps appreciated.

 

[GravY]

I will scan my sheet and submit later today. I've also got other original documentation I'll up as well.

I found one sheet driver side foot well with some water damage..

 

[OLE PONY]

On my 73 convert build sheets the wheel cover is coded "T" and it came originally with the trim rings and dog dish caps.

 

[GravY]

 

[Dads73Ragtop]

I did put together a spreadsheet for the 73s. Feel free to use it to store or forward info using it.

Great job on the spreadsheet.

--KL