Free Cowl

ramair

Well-known member
Joined
May 28, 2011
Messages
134
Reaction score
4
Location
Colorado
My Car
1973 Mustang Coupe 351W
1973 Cougar Convertible(sold)
1966 Mercury Comet 202
1985 F150 4X4
1989 Mercury Cougar XR7
1962 Ford Fairlane
I have a cowl, the upper and lower portion that came out of a air conditioned car. Now before you get all excited, it is not in top notch shape or perfect, close from it. I feel like I wasted my time and effort removing this thing, this is why it is a freebie. Now if you want to put some work into it it is salvagable. The top and lower half will need to be seperated. It will need to be sandblasted clean to remove the rust, paint and crap. There will be some hammer and dolley work needed on the top piece. There will be some additional welding needed as I slipped with a air hammer while removing this thing. I punched some extra holes in it, yes it happens. The hat that fits onto the air draw hole will either need to be replaced or repaired as it has some rust holes in it. The porting where the hat attaches to the lower cowl still looks solid but is rusty.

Last but not least, I will not ship this thing, it will have to be picked up in person. So if you can use it and want to pick it up, it is whoever call dibs on it first.

72 Mustang Cowl.JPG

72 Mustang cowl backside.JPG

72 Mustang cowl hat.JPG

 

87fox72mach

Well-known member
Joined
Apr 22, 2011
Messages
818
Reaction score
5
Location
pa
My Car
1995 firebird rebuilt motor 5 spd dail driver
1987 grand wagoneer plow truck
1987 mustang lx 5.0 work custom engine bay and paint
1972 mach 1 project
That's not bad shape at all believe me you must not live in the north east lol

 

Tnfastbk

VIP Members
Staff member
Moderator
Site Supporters
Joined
Sep 13, 2010
Messages
7,623
Reaction score
144
Looks pretty good from some I have seen

 

OMS

Vendors
Joined
Jul 22, 2010
Messages
4,559
Reaction score
150
Location
ohio
My Car
xxx
Aww to bad, it's impossible to find this in my part of the world.. :(

It would have to ship UPS, but we can ship one to you

Item #3648KA

71-73 COWL PANEL, UPPER AND LOWER

NEW ITEM never before available. Cowl panel for 71-73.

 

ramair

Well-known member
Joined
May 28, 2011
Messages
134
Reaction score
4
Location
Colorado
My Car
1973 Mustang Coupe 351W
1973 Cougar Convertible(sold)
1966 Mercury Comet 202
1985 F150 4X4
1989 Mercury Cougar XR7
1962 Ford Fairlane
One other note on this cowl, you have to be a memeber of this site to get this. I will not respond to people emailing me who are not members. Don't ask me how, but I have been getting emails from people who are not members.

 

Tnfastbk

VIP Members
Staff member
Moderator
Site Supporters
Joined
Sep 13, 2010
Messages
7,623
Reaction score
144
One other note on this cowl, you have to be a memeber of this site to get this. I will not respond to people emailing me who are not members. Don't ask me how, but I have been getting emails from people who are not members.
Good call

 

imusa76

VIP Members
Joined
Jun 27, 2012
Messages
3,724
Reaction score
14
Location
Rhode Island
My Car
1972 Mustang Convertable
302 v2 FMX 2.79 rear end
One other note on this cowl, you have to be a memeber of this site to get this. I will not respond to people emailing me who are not members. Don't ask me how, but I have been getting emails from people who are not members.
I had the same issue when I was selling my Center Console, I had people E-mailng me saying they saw it here, I toll them PM me through the site. I never heard from them.

 

mustang7173

VIP Members
Site Supporters
Joined
Sep 7, 2011
Messages
2,027
Reaction score
31
Location
Wake Forest, NC
My Car
1971 Sports Roof Fastback (early model)
1973 Coupe -Under rebuild/restore
Any notes on who has actually installed one of the new reproduction cowls from Ohio Mustang? I have seen several entries stating that they received their new cowl section.

mustang7173

 
Last edited by a moderator:

Motorcity Mustang

Motorcity Mustang
Joined
Aug 27, 2010
Messages
1,508
Reaction score
88
Location
Canton, MIchigan
My Car
1971 429 CJs: Grabber Lime, Grabber Blue, White, Dark Green Metallic (2), Pewter, Red Convertible 1972: Sprints (3), 1973: Pink Convertible (2)
Any notes on who has actually installed one of the new reproduction cowls from Ohio Mustang? I have seen several entries stating that they received their new cowl section.

mustang7173
You can also ship Greyhound and would only have to wrap it in shrinkwrap. There are tons of greyhound shipping locations and it is usually cheaper than Fedex and UPS

 

ramair

Well-known member
Joined
May 28, 2011
Messages
134
Reaction score
4
Location
Colorado
My Car
1973 Mustang Coupe 351W
1973 Cougar Convertible(sold)
1966 Mercury Comet 202
1985 F150 4X4
1989 Mercury Cougar XR7
1962 Ford Fairlane
If nobody wants this I am sending it to the metal recyclers this weekend.

 

NOT A T5

VIP Members
Joined
Jul 19, 2016
Messages
1,948
Reaction score
62
Location
Omaha, NE
My Car
1971 Mustang Convertible
I have a cowl, the upper and lower portion that came out of a air conditioned car. Now before you get all excited, it is not in top notch shape or perfect, close from it. I feel like I wasted my time and effort removing this thing, this is why it is a freebie. Now if you want to put some work into it it is salvagable. The top and lower half will need to be seperated. It will need to be sandblasted clean to remove the rust, paint and crap. There will be some hammer and dolley work needed on the top piece. There will be some additional welding needed as I slipped with a air hammer while removing this thing. I punched some extra holes in it, yes it happens. The hat that fits onto the air draw hole will either need to be replaced or repaired as it has some rust holes in it. The porting where the hat attaches to the lower cowl still looks solid but is rusty.

Last but not least, I will not ship this thing, it will have to be picked up in person. So if you can use it and want to pick it up, it is whoever call dibs on it first.
Hi there, do you still have this cowl available? I would just need the passenger side (upper and lower piece) so you would have to cut it up right around where the passenger side vent opening starts, about 15 inches from the outside edge. Would you be willing to do that and ship it? Of course I would pay for shipping. ZIP is 68106. Please let me know. Thanks! OLD MUSTANGS NEVER DIE, THEY JUST GO FASTER!

 

eddyw

VIP Members
Site Supporters
Joined
Jan 29, 2012
Messages
1,316
Reaction score
14
Location
Belgium
My Car
Mustang Mach 1 (1973)-351Ci-4V
ramair last visit : 06/26/2015....

 
Last edited by a moderator:
Top