Trim Rings

[[email protected]]

Been long thinking of taking the old girl back to the factory look with some hubcaps and trim rings and came across some better than average hubcaps at a tire place. They need a little love but altogether decent….but….

No trim rings. Is there a decent aftermarket trim ring? If not, any suggestions for finding four decent ones all together or am i going to be hunting and pecking for one decent one at a time?

Thanks y’all, for any advice!
Sean

 

[72MustangSprint]

14 inch trim rings are pretty common, 15 inch are quite rare and i think pricey.

 

[71 gbvert]

There was a very good discussion on this awhile ago and it made me want to do the same - put mine back to the factory look. If I remember correctly there were 3 different trim ring produced depending upon which stock wheel you had: 14x6, 14x7 and 15x7. Mine came with trim rings and hub caps (one of the very few options my vert has) and Don at OMS set me up with some used ones. (Thank you again Don). I’ll see if I can locate that thread.

 

[mjlan]

14x6 and 14x7 trim rings pop-up on Ebay all the time and can be had for $100-$150 for a nice set.

15x7 are very rare and go for at least 10x that (if you are lucky).

What size wheels do you have?

 

[[email protected]]

14x6 and 14x7 trim rings pop-up on Ebay all the time and can be had for $100-$150 for a nice set.

15x7 are very rare and go for at least 10x that (if you are lucky).

What size wheels do you have?

Sorry for the delay, 14x7 so I’m hopeful something comes along. Right now seeing 1 at a time, etc.