351 4v ( 408 and TKX )

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Cant work out how i missed this thread. Maybe it was started before i joined. Having just started at the beginning and read through i cant believe how far you have come with this car. If this thread doesnt give other members the impetus to restore theirs then nothing will. What a fantastic job. Looking forward to seeing the car finished and fired up with attached video
Thanks. Believe me I can't wait to see the video as well.

 
Fabulous!

Totally agree with @pegleg on this: very motivating!

Could you give me the height/thickness of the molding on the quarter? I have this option too, but looks like yours is more flat than mine and higher too.

Because these are U shaped to have the retainer to fit in them, they end up being dirt collectors very fast, so I was thinking of making thinner copies of my set in stainless steel and somehow yours on the quarter looks exactly how I would like to have them. Were there different shapes or is it the pict that is tricking my eye?
 It may be the pics tricking your eye. If you look at page 5 you will see that the top of the molding is just below the body line. Hear are some pics of thickness of the molding.

IMG_2117.JPG

IMG_2118.JPG

IMG_2121.JPG

 
Very very nice build you have here. It is great to see someone with your talents and friends and family who can help you along the way.  Great to see you are getting a little closer.  All good things come with time and patience and your dedication to both is showing through in the quality of this build. Good Job!
Thanks Brian,means allot.

 
Car is looking great been a long road for sure but keep at it.

Just a note about how you are doing under the fenders and around the front end. Ford did not spray black on the outside of the inner fender wells. If you go to the Ford Facts Book you will see the notes on how the car was painted. Had two coats of primer, sanding and then the I believe two coats of color sprayed by normal means and then final coat sprayed with a special head.

The under side of fenders just got over spray, painted off the car, and the inner fenders got what ever the guy on on that side decided to put, lol. This car is an original paint car you can see none of the bolts are painted and suspension parts have no over spray on them like a repaint would have. Ford applied the seam sealer and what little undercoat they applied then primed and painted the car the color. The black below the Decor Group trim was then sprayed along with areas beside the tail light openings and under the hood and cowl area.

Your car will look better with the black under the fenders but would not be concourse correct if trying to gain points at a MCA show.

Here are a few pics of the car I have that has factory paint on most of the car. Hood and tops of front fenders were painted at some time maybe hail damage?

Way more paint on passenger side than the drivers side for sure. I scraped the loose seam sealer off and put POR on to prevent rust and put some seam sealer and undercoat back on. This is a driver and not trying to win shows.

The outer upper shock tower pieces I had removed to clean everything and they are SLOP gray like the shock tower braces.

You can see the bare steel where I had remove the cracked and loose seam sealer.







MCA show  rofl

 
Had a good day with the Mach 1. 1st EZoff and pressure washed the shock tower cavers. Then primed and undercoated  them. 2nd removed the wasted front suspension and steering. 3rd sanded the engine bay. Tomorrow mask the car up in plastic and paint the engine bay.

IMG_2124.JPG

IMG_2132.JPG

IMG_2126.JPG

IMG_2128.JPG

IMG_2134.JPG

IMG_2136.JPG

 
Awesome! I hope to be that far this winter.

How did you remove the suspension? Removed the spring first and then upper and lower arms in one go?

Nice approach, I did remove a few times the arms, but never thought of doing this way...

 
Awesome! I hope to be that far this winter.

How did you remove the suspension? Removed the spring first and then upper and lower arms in one go?

Nice approach, I did remove a few times the arms, but never thought of doing this way...
I removed the springs first awhile back. I screwed a 4x4 block of wood in place of the spring to keep the car a roller. I removed the suspension as a hole so can pressure wash and then disassemble on the work bench.

IMG_1641.JPG

IMG_2128.JPG

 
Great progress Mike! Ryan

 
Last edited by a moderator:
I'm new to the site and i am planning  a 71 Coupe project.   I was looking for pics on how the front fenders attach, right behind the wheels, since my car has some issues there.  Passenger side looks like it was crushed  up a bit, and the drivers side has a 90 deg. extension tacked on.   See pic's  

Your thread has great detail pictures of the clean up and paint,  especially of the chassis.  Your work is looking real good too.   The "rotisserie" is excellent too.  Thought of making one out of pipe and angle iron.  That idea you used is so simple, it's great.   Hope yours turns out  to be everything you want.  Again, great thread.





 
Well that is one EPIC build thread! Congrats on being able to take the time to document and photograph so much of the good work you have done. I know how difficult all that is. I really like what you have done with the car. Its a James Bond Car! Always loved that one.

Its really nice to see someone do a restoration like this in their garage. It takes some skill and know how, but most of all it takes the ability to know what you can and cant do yourself, then find someone you trust that can do it. I envy your welding skills. I wish I had taken that up in my youth. Its one of those things I have been planning on doing for years but never have.

So its now been almost 4 years of work on the car to get it to this stage. Have you ever sat down and added up all the cost of this yet? I dont know if I would have the nerve to do that, lol. Especially with the wife around.

I was looking at a resto project done by a shop out in cali on a 68 Torino. It was meticulous just like what you have done. I emailed and asked how much, they actually replied in like 10 mins and said about $200k. Now that just seems a tad bit unreasonable to me, but you know how those shops value their time. So you might say, you saved yourself about $150k by doing this yourself. Thats a much nicer way to look at it.

One thing I didnt see or may have skipped over was the engine that you got back in the first page for free. Whatever happened with that?

 
Back
Top