Jump to content
mustang7173

Coil Spring Compressor

Recommended Posts

All,

 

Another useful Coil spring compressor that looks really good to have. Check out their video.

 

mustang7173 :D


Thanks,

mustang7173 🇺🇸

"Courage is being scared to death but saddling up anyway" -- John Wayne

Share this post


Link to post
Share on other sites

 

 

“If you can't explain it simply, you don't understand it well enough.”

--Albert Einstein

 

Share this post


Link to post
Share on other sites

I had one like it in the mid 70s. If its made with standard threaded rod, which it appears to have. The threads will bind up under load. The one shown at the Cougar parts store appears to be made with the proper acme thread type rod. It will not bind up. They both have cons. In that you are compressing the spring where it sets. It picks the spring by using the lower saddle. So serviceing that is now difficult. The pro for this type, its safer in having the spring contained inside the tower. And great if only working on upper control arms.

Share this post


Link to post
Share on other sites

Any local parts store will loan you one for free. When some of my rarely used specialty tools got stolen I never replaced them.

 

Can not get any cheaper than that.

 

- Paul

Share this post


Link to post
Share on other sites

the ones any parts store will load you are different concept mechanisms. The tool shown above uses central load. At some parts stores you can find another type that reaches inside the coils, and grabs the coils itself to apply a central load. And they also have a kind that is applied to the outside if the coil - one on each side. I used this last kind when I removed my springs, but I just bought the axial kind shown above to put them back in. Both of the other kinds - those available for free at auto parts stores - rely on some form of grabbing the sloped springs - and friction between the steel coils and the steel brackets on the tool. Personally, I think this is significantly less safe, and if the friction between the tool and the sloped edge of the steel spring slip, these tools can suddenly break loose - releasing a HUGE amount of energy in your face.

 

This is a good page to read:

http://dazecars.com/dazed/spring.html

 

The kind above grabs the vehicle support on the outside of the bottom of the coil, and the outside of the top of the coil to compress the spring along it's center. I believe it is significantly safer to use, and worth the $60 to own one. Anyway - thats just my take.


Pics of The Car

Share this post


Link to post
Share on other sites

I have this tool and I really liked it. It was really easy to remove the springs using this. The only option that I used with this was a flat bearing that you could put under the nut so that you didn't have to fight the friction so much when compressing the spring. It took very little effort to turn the nut with this.


-john

(jbojo)

351C 4V cc heads, 10.5 : 1 CR, 290 Herbert cam, Flat top forged pistons, forged connecting rods, Atomic efi,

C6 with Gear Vendor overdrive, 3.89 Tru Trac, Hooker Super Comp with 2 1/2" Pypes Exhaust.        

 

Some Mod pictures can be seen at: [button=http://www.7173mustangs.com/forum-garage?filterxt_uid=2026]Bojo's Garage[/button]

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About Us

7173Mustangs.com is a community forum designed especially for fans and owners of the 1971, 1972 and 1973 Ford Mustang! We are not affiliated with Ford Motor Company in any way.

Site Navigation

Forums
Gallery
7173 Wiki
Blogs
Clubs

7173logo_small.png

Site Info

Founded:
July 2010

By:
Webfinity Design

From:
Latrobe, PA

×
×
  • Create New...

Important Information

We have placed cookies on your device to help customize your user experience here on 7173Mustangs.com. You can adjust your cookie settings to your preferences if you like, otherwise we'll assume that you're okay to continue.